Gorilla Anti-Slip Tape

1. Surfaces must be flat, dry and free of dirt, grease and oil. Clean with isopropyl alcohol. Dry thoroughly.

2. Cut the tape to the desired length and round the corners.

3. Remove the foil and apply to the surface, starting in the center and moving towards the edges.

IMPORTANT:

Apply when the temperature is above 4°C.

Temperature range during use: -40°C to 105°C

Prime and seal all wood and concrete before use.

Not recommended for areas of continuous water immersion such as pools, bathtubs and spas.

Avoid placing Gorilla Heavy Duty Anti-Slip Tread Tape in joint lines, cracks or to bridge gaps.

* This product is not specifically recommended by OSHA or ADA.

• DURABLE GRAIN: Grain is secured with several layers of protective coating
• Weatherproof: Indoor/Outdoor
• Non-slip: Non-slip even when wet and surrounded by smooth surfaces.
• UV-Resistant
• Can be cut with scissors.
• Exceeds US OSHA and ADA coefficient of friction recommendations*
• Suitable for: Sealed wood, composite decking, metal (steel/aluminum), sealed concrete and more!

* This product is not specifically recommended by OSHA or ADA.

• Application temperature: Above 4°C, best at room temperature
• Service temperature: -40°C to 105°C
• Outdoors: Yes
• Moisture resistant: Yes
• Storage tips: Store in a cool, dry place

What surfaces can the tape be applied to?

Gorilla Heavy Duty Tread Tape is perfect for ladders, steps, ramps, boats, RVs, patios and more!

Typical surfaces are sealed wood, composite decking, metal (steel/aluminium) and sealed concrete.

Do you need to use a primer before application?

Many applications require only a clean, dry surface. Unsealed concrete and bare wood surfaces must be painted, stained or sealed to ensure they do not allow unwanted moisture to contact the adhesive for extended periods of time.

Follow all manufacturer's directions for paint, stain or sealer to ensure surface is ready before applying Gorilla Heavy Duty Tread Tape.

How do I apply Gorilla Heavy Duty Tread Tape?

Surfaces must be flat, dry and free of dirt, grease and oil. Clean with isopropyl alcohol. Dry thoroughly.

Cut tape to the desired length and round corners. Remove the foil and apply it to the surface, starting in the center and moving towards the edges.

How do I remove Gorilla Heavy Duty Tread Tape from my surface?

Slowly pull Gorilla Heavy Duty Tread Tape from one edge or corner. Peel or scrape residual adhesive on the surface and apply an adhesive remover to remove any residue. Clean surface thoroughly of residual adhesive before installing fresh Gorilla Heavy Duty Tread Tape.

Gorilla Heavy Duty Tread Tape (Non-Slip Tape) SDS (UK)