Gorilla Paste Waterproof Patch & Seal - White

1) Clean the surface of dirt, dust, grease and oil.

2) Apply to the surface with a trowel. Make sure the surface is completely covered and all holes and cracks have been filled.

3) Allow to harden between layers. Full curing after 24-48 hours.

NOTE: Slight peeling may occur inside the can if the lid is not tightly sealed. If present, remove peeling material to continue use and secure cap immediately after use.

STORAGE: Remove excess product from the edge of the can with a dry cloth. Press or tap the lid lightly to create a tight seal.

DRYING TIME: The paste begins to harden when exposed to air and moisture and will develop a surface skin after 15 to 30 minutes. Full curing after 24-48 hours.

CLEAN UP: Immediately wipe off unwanted material with a dry cloth or paper towel. Use mineral spirits to clean putty.

• STOPS AND PREVENTS LEAKS
• INSTANTLY SEALS WATER, AIR AND MOISTURE
• SPREADABLE TO COVER LARGE CRACKS AND HOLES
• FLEXIBLE AND PAINTABLE
• DOES NOT SHRINK
• RESISTANT TO MOULD, FUNGUS AND ROT

• Application temperature: 5°C to 49°C
• Service temperature: -40°C to 100°C
• Outdoors: Yes
• Moisture resistant: Yes
• Can be painted: Yes
• Sandable: Yes
• Can be dyed: No
• Expands after curing: No
• Cured color: White or black
• Storage tip: Press or tap the lid lightly to create a tight seal. A loose seal can allow the product to easily skin over the inside of the can. If this happens, scrape off the skin with a putty knife and use the rest of the contents. Store dry at room temperature.
• Hole filling: Yes, up to 7 cm

Will Gorilla Waterproof Patch & Seal sealant bond plastic/vinyl/rubber?

Gorilla Waterproof Patch & Seal paste will work well on many types of plastic; however, we do not recommend use on polypropylene (PP) or polyethylene (PE) plastic, or any type of rubber with a high content of oil or plasticizers.

How to store Gorilla Waterproof Patch & Seal Rubberized Sealant Paste

Press or tap the lid lightly to create a tight seal. A loose seal can allow the product to easily skin over the inside of the can. If this happens, scrape off the skin with a putty knife and use the rest of the contents. Store dry at room temperature.

What surfaces will Gorilla Waterproof Patch & Seal Rubberized Sealant Paste bond to?

Gorilla Waterproof Patch & Seal sealing paste is designed to seal out water, air and moisture. Surfaces for use include roofs, gutters, skylights, flashings, chimneys*, PVC pipe joints, windows, RVs and other DIY projects. *Please note that this product is not intended for use inside a firebox or chimney. It may not work for all types of plastic or rubber.

Is Gorilla Waterproof Patch & Seal Rubber Sealing Paste food safe?

Gorilla Waterproof Patch & Seal Rubberized Sealant Paste is not recommended for direct or indirect food contact and should not be considered food safe.

How do I remove Gorilla Waterproof Patch & Seal Rubberized Sealant Paste from the body/skin?

Wipe off most of it with a dry cloth or paper towel, then wipe with isopropyl alcohol.

How do I remove Gorilla Waterproof Patch & Seal Rubberized Sealant Paste from my surface?

Uncured: Immediately wipe off unwanted material with a dry cloth or paper towel. Do not use water. Use mineral spirits to clean putty.

Cured: Cut or scrape with a knife.

Gorilla Paste Waterproof Patch & Seal - White SDS (UK)