E6000 Spray Glue
E6000 Spray Glue
Couldn't load pickup availability
E6000 Spray Glue
There is no product like this! E6000 Spray Glue is a permanent, versatile latex-based adhesive with no toxic odors, fumes or harmful side effects.
It is strong, flexible and water-repellent, resists penetration and yellowing, and works well on most materials.
- Odorless
- Can be cleaned with water
- Can be used on many different surfaces
- Extremely strong, flexible and water-repellent
- Non-harmful – contains no VOCs, harsh chemicals or propellants
- Photosafe
- Very easy to use
- Dries transparently
Share
Collapsible content
Instructions
Follow these steps when using E6000 Spray Adhesive:
- Read the entire instruction manual before use.
- Shake the bottle thoroughly before use.
- Protect the area around the work surface from overspray.
- Point the spray nozzle away from the face.
- Hold the bottle approximately 20–25 cm from the surface.
Paper, photos, cardboard and foil:Spray a thin layer onto one surface. Gather the materials and press evenly to ensure good adhesion, especially in the corners. Allow to dry for 1–3 minutes.
Porous materials (including foam and Styrofoam):Spray a thicker coat on both surfaces. Press the materials together. Let dry.*
Non-porous materials:Spray a thin layer on one surface. Assemble the materials. Let dry.*
IMPORTANT – Clean after each use.
To avoid clogging, the nozzle/hose must be removed and rinsed.
Pump hot water through the syringe until all glue is removed.
Then dry, put the parts back in the bottle and close the lid.
*Maximum strength is usually achieved after 1–5 hours. Styrofoam may require overnight curing.
FAQ
What materials can E6000 Spray Glue be used on?
E6000 Spray Glue can be used on a wide range of materials such as paper, wood, poster board, cardboard, photos, foil, medium to heavy textiles, vinyl, foam, Styrofoam, glass, felt, plastic, rubber, leather and metal.
What temperature range can E6000 Spraylim withstand?
Application temperature: best between 10 – 54 °C. Operating temperature / heat resistance: -1 – 65 °C
Is E6000 Spray Glue UV-resistant?
It resists yellowing.
Can E6000 Spray Adhesive be used on Styrofoam™?
Yes. It can also be used on other types of foam.
Is E6000 Spray Glue water-repellent?
Yes. Once cured, the adhesive has good water resistance.
How long does it take for E6000 Spray Glue to dry?
Paper, photos, cardstock and foil: 1–3 minutes
Porous materials: 1–5 hours
Styrofoam may require overnight curing
Non-porous materials: 1–5 hours
How to clean uncured E6000 Spray Glue?
With plain hot water.