E6000 Premium
E6000 Premium
Couldn't load pickup availability
Bonds plastic like other glues can only dream of!
E6000 Premium creates permanent bonds on even the most difficult materials such as plastics used in 3D printing, polycarbonate, PVC, ABS, acrylic, polystyrene, fiberglass, etc. At the same time, it provides extremely strong adhesion on materials such as wood, metal, fabric, ceramics, glass, cement, clay and many more.
The unique formula makes E6000 Premium the ideal adhesive for hobby and creative projects, DIY tasks around the home, automotive repairs, industrial applications and much more.
- Extreme flexibility
- Withstands extreme temperatures
- Waterproof
- Dries transparent / can be painted over
- Washer and dryer safe
- Permanent binding
Share
Collapsible content
Instructions
Follow these steps when using the E6000 Premium:
- Read the instructions for use and test on a small area first. The surface must be clean, dry and free of dirt. For best results, it is recommended to lightly roughen the surface before use.
- Puncture the seal in the neck of the tube with the tip in the cap. Ideal working temperature is 10–32°C. Once fully cured, the adhesive will withstand temperatures from -40 to 82°C intermittently.
- Apply glue directly to both surfaces to be bonded. Allow the glue to set for approximately 2 minutes before joining the surfaces.
- Allow the adhesive to cure for 24 hours. Depending on the materials and temperature, maximum strength may not be achieved until 48–72 hours.
- To make opening the cap easier later, apply a thin layer of Vaseline to the tube threads before screwing the cap back on. Uncured glue can be cleaned with acetone or citrus-based solvents. Cured glue can be removed by cutting or scraping it away.
Note:May damage finished surfaces. Avoid contact with such surfaces until adhesive is fully cured. Not recommended for use on Styrofoam™ or paper products. Not suitable for items that come into contact with food, drinking water or animals. Do not dry clean.
FAQ
How long does it take for E6000 Premium to dry?
The adhesive sets after approximately 20 minutes and should cure in 24 hours. Depending on the materials and temperature, maximum strength may not be achieved until 48–72 hours.
What makes E6000 Premium different from other glues?
E6000 Premium is developed with enhanced adhesion enhancers that provide excellent performance – and enable bonding of plastics that many other adhesives cannot bond
effectively.
Can the E6000 Premium withstand washing machines and dryers?
Yes.
How to remove E6000 Premium?
Uncured adhesive can be removed with alcohol, white spirit, acetone or a dry cloth. Cured material can be removed with white spirit or by cutting or scraping it away.